Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
NORD LOCK Wedge Locking Washers / Nordlock evenly distributes head pressure on the surface without damage. They also help ensure that the binder is pressed on a smooth surface to reduce the chance of loosening over time. The washer key bites on the top of the binder and Material: to prevent loosening. Wave washers have irregular shapes that are resistant to loosening and distributing pressure on low-strength binders. Our distribution channels are available in Indonesia, Bekasi and Surabaya.
| Article No. | 2146 |
|---|---|
| Part number | NL1/2" |
| Brand | NORD-LOCK |
| Applications | General steel applications |
| Material | Steel |
| Bolt size (UNC) | 1/2" |
| Inner dia. d (mm) | 13.5 |
| Outer dia. D (mm) | 19.5 |
| T(mm) | 2.5 |
| Coating | Delta Protekt KL100 zinc flake coating |
| Material standard | EN 1.7182 |
| Corrosion resistance | Minimum 1,000 hours in salt spray test (according to ISO 9227) |
| Hardening | Through hardened |
| Hardness | Greater than 465HV1 |
| Bolt grades | Up to 12.9 |
| Temperature range | -50degC to 200degC |
| Laser Marking Type Code | flZn |
| Pairs per pack | 200 |
| Country of Origin | Sweden |
| Harmonization Code | 7318210090 |